UKCheck a car
Menu

Dashboard warning lights to watch for when buying

Every warning light should come on with the ignition and go out once the engine starts. A light that stays on is a fault to explain before you buy; one that never lights may have been disabled. An engine, airbag or ABS warning light that shows a fault is a major MOT defect.

Buying Report £14.99 incl. VAT · one car · no subscription · Not a mechanical inspection.

Warning lights that fail the MOT most often, and the repair each one points to

Share of all MOT tests of class 4 vehicles (cars and light vans), 2022 to 2025. A repair is named only where it fixes the same system. The repair page explains what the job involves and how its estimate is made. [1]

Topic: Common faults and maintenance

When you view a used car, the warning lights tell you two things. First, what is wrong now: a light that stays on after the engine starts is a fault to explain before you buy. Second, whether anyone has tried to hide a fault: every warning light should come on when you turn the ignition on and then go out. A light that never comes on at all may have been disabled. Several warning lights are also part of the MOT, so a car with a lit airbag, ABS or engine management light can fail.

The basic rule: on at ignition, then off

The Highway Code says that when you turn the ignition key, warning lights will come on but should go out when the engine starts, except the handbrake warning light. If they do not, or if they come on while you are driving, it says to stop and investigate, because you could have a serious fault.

That gives you a simple test at a viewing:

  1. Sit in the driver's seat with the engine off.
  2. Turn the ignition to the position before starting, or press the start button without your foot on the brake or clutch, depending on the car.
  3. Watch the dashboard. The warning lights should all light up for a moment. That is the bulb check.
  4. Start the engine. The lights should go out within a few seconds, apart from the parking brake light if the parking brake is on.

Some cars use a screen instead of separate bulbs and show a message as well as a symbol. The idea is the same. Check the handbook if you are not sure what a symbol means.

Red lights: stop and find out

Red usually means a problem that needs attention straight away. Colours and symbols vary between cars, so treat this as a general guide.

LightWhat it usually meansAt a viewing
Oil pressureThe engine is not getting enough oil pressureDo not drive the car until it is explained
Brake systemLow brake fluid, a brake fault, or the parking brake onIf it stays on with the parking brake off, do not drive it
Coolant temperatureThe engine is overheatingStop. See our head gasket guide
Charging or batteryThe battery is not being chargedThe car may stop when the battery runs flat

The Highway Code points out that a charge warning light can mean the battery is not charging, and that low brake fluid may result in brake failure.

Amber lights: check soon

Amber or yellow usually means a fault to have checked soon. On a car you are thinking of buying, "soon" means before you pay.

  • Engine management light. A fault in the engine or emissions system. It has many possible causes, from a loose fuel cap to a serious engine problem. A garage can read the stored fault codes.
  • ABS. A fault in the anti-lock braking system. The normal brakes may still work, but the anti-lock function may not.
  • Airbag or SRS. A fault in the airbags or seat belt pretensioners. They may not work in a crash.
  • Stability control (ESC). A fault in the system that helps stop the car skidding.
  • Tyre pressure monitoring (TPMS). Low tyre pressure, or a fault in the monitoring system.
  • DPF. On diesels, the particulate filter is filling up. See our guide to DPF problems.
  • Glow plug. On diesels, it normally lights briefly before starting. If it flashes or stays on, there may be a fault.
  • Power steering. A fault in the electric power steering.

Which warning lights fail the MOT

The DVSA inspection manual includes several warning lamps. These are the main ones, as the manual describes them at the time of writing.

Warning lampDefect in the manualCategory
ABSWarning device not working, or showing a system malfunctionMajor
Airbag (SRS)Malfunction indicator lamp indicates a system malfunctionMajor
Stability control (ESC)Malfunction indicator lamp indicates a system malfunctionMajor
Engine managementLamp inoperative or indicating a malfunctionMajor
Electric power steeringMalfunction indicator lamp indicating a system malfunctionMajor
Electronic parking brakeMalfunction indicator lamp indicates a malfunctionMajor
Tyre pressure monitoringSystem malfunctioning or obviously not workingMajor
Brake fluidWarning light illuminated or defectiveMinor

A major defect fails the test. A minor defect is recorded but the car passes. Our guide to MOT advisories and failures explains the categories.

A few details matter:

  • Engine management is checked on most petrol cars first used from 1 July 2003 and diesel cars first used from 1 July 2008.
  • Tyre pressure monitoring is checked on passenger cars first used on or after 1 January 2012. The manual notes that a TPMS light can stay on simply because a tyre was low, which is not automatically a malfunction.
  • A passenger airbag "off" light is not a defect when it is only showing that the passenger airbag has been switched off.
  • Brake pad warning lights were added to the MOT checks when the test changed on 20 May 2018, but the current manual says an illuminated brake wear indicator is not on its own a reason for failure. Pads worn down to the wear indicator are a major defect.

How sellers hide warning lights

A warning light that is on is easy to see. A warning light that has been disabled is not. Sellers have been known to remove a bulb, disconnect a lamp or clear stored fault codes just before a viewing. A cleared fault can come back after a few miles.

That is why the bulb check matters. Look for each light during the ignition-on moment. If a light you would expect to see, such as the airbag or ABS light, never comes on at all, ask why. A missing bulb check is a warning sign in its own right.

Other things to watch for:

  • A car that is already running when you arrive. You miss the bulb check. Ask the seller to switch it off, wait a minute, and do it again with you watching.
  • Lights that come on after a long drive. Some faults only show once the engine is warm or the car has done a few miles. Take a proper test drive, and use our test drive checklist.
  • A recently disconnected battery. This can reset some warnings temporarily.

The MOT also checks some of these lamps for operation, so a disabled light can fail too. But you should not rely on the next MOT to find it.

What to do if a light is on

  1. Ask the seller what it is and what has been done about it. Ask for invoices.
  2. Do not accept "it's just a sensor" without evidence. It may be, but a sensor fault can still fail an MOT, and the repair can cost real money.
  3. Ask for a diagnostic check. A garage can read the fault codes. Some sellers will agree to this at a garage of your choice.
  4. Price it in or walk away. If the seller will not explain or fix it, factor the unknown cost into your offer, or look at another car.

If you are not sure, see the car and ask a mechanic.

In short

  • Red lights mean stop and find out before driving.
  • A light that never comes on may have been disabled.
  • Engine, airbag and ABS fault lights fail the MOT.
  • A low-tyre warning is not automatically an MOT fail.

Questions people ask

Which dashboard warning lights are most serious?

Red lights, especially oil pressure, brake system and coolant temperature. If one stays on after the engine starts, do not drive the car until the cause is known.

Will a car fail its MOT with the engine management light on?

On most petrol cars first used from 1 July 2003 and diesels first used from 1 July 2008, yes. The DVSA manual makes a lamp that shows a malfunction a major defect.

Can a seller hide a warning light?

Yes, by removing a bulb, disconnecting a lamp or clearing fault codes. Watch for every light to come on when the ignition is switched on, then go out.

Is a tyre pressure warning light an MOT fail?

A malfunctioning or obviously not working TPMS is a major defect on cars first used on or after 1 January 2012. A light that is on only because a tyre is low is not automatically a malfunction.

Buying Report £14.99 incl. VAT · one car · no subscription · Not a mechanical inspection.

Check one car by its registration

These free tools answer for one car. Each line says what the tool reads.

Read next

The data behind this guide

Sources

  1. Driver and Vehicle Standards Agency, Anonymised MOT tests and results, 2022 to 2025. DVSA MOT data, Open Government Licence v3.0. Accessed 7 Oct 2026.
  2. The Highway Code, Annex 6, vehicle maintenance, safety and security. Government guidance. Accessed 8 Oct 2026.
  3. DVSA, MOT inspection manual, section 1 (brakes). Government guidance. Accessed 8 Oct 2026.
  4. DVSA, MOT inspection manual, section 2 (steering). Government guidance. Accessed 8 Oct 2026.
  5. DVSA, MOT inspection manual, section 5 (tyre pressure monitoring). Government guidance. Accessed 8 Oct 2026.
  6. DVSA, MOT inspection manual, section 7 (airbags and stability control). Government guidance. Accessed 8 Oct 2026.
  7. DVSA, MOT inspection manual, section 8 (engine malfunction indicator lamp). Government guidance. Accessed 8 Oct 2026.

We check each guide against the sources listed and update it when the rules change. The table uses DVSA's anonymised MOT data: Contains public sector information licensed under the Open Government Licence v3.0. General information, not legal or financial advice. Not affiliated with or endorsed by DVSA, DVLA or any government body.