UKCheck a car
Menu

Vehicle recall · Mazda 3 and others

Recall R/2018/289: Injector mounting nuts tightening force

DVSA recall records launched 17 Sep 2018 · Updated

DVSA recall R/2018/289 covers Mazda 3 and other models, built Jan 2012 to Jan 2016, and was launched 17 Sep 2018 [1].

Buying Report £14.99 incl. VAT · one car · no subscription · Not a mechanical inspection.

  • Stated risk: loss of drive, lights or visibility (from the recall's own wording)
  • Vehicles: 11,021 across the whole recall
  • Models: 3 lines in the DVSA file naming 3 models, listed below with their build dates

The build date and the VIN decide whether one car is covered. Check the reg first.

What can go wrong

Recall
R/2018/289
Type
Vehicle recall
Launched
17 Sep 2018
Issued by
MAZDA
Manufacturer reference
AJ024E
Built
Jan 2012 to Jan 2016
Vehicles
11,021 across the whole recall

DVSA summary. Injector mounting nuts tightening force may be insufficient

The tightening force of the injector mounting nuts may be insufficient. This could cause combustion gas to leak from the injector and contaminate the engine oil within the cylinder head. This in turn could cause the engine oil strainer to become blocked. This could cause the engine to stall. Engine Pressure Oil Light appears along with the engine malfunction indicator. Possible Engine Stall without Warning

Stated risk: Loss of drive Lights or visibility

The fix

Vehicles affected will have the engine checked for contamination and repaired / replaced if necessary. The Fuel injectors will also be re-tightened to the appropriate torque.

Defect and remedy: DVSA's wording [1].

Models and build dates

As listed in the DVSA recall file. DVSA gives one vehicle number for the whole recall: 11,021.
ModelBuiltMore on the model
Mazda 3Jan 2012 to Jan 2016Mazda 3 MOT fail rate by age
Mazda 3 common problems
Mazda 6 recallsJan 2012 to Jan 2016Mazda 6 MOT fail rate by age
Mazda 6 common problems
Mazda CX-5 recallsJan 2012 to Jan 2016Mazda CX-5 MOT fail rate by age
Mazda CX-5 common problems

How to check the one you are buying was fixed

  1. Ask the seller for proof that recall R/2018/289 was done. A dealer invoice or job card names the recall reference or the manufacturer's campaign code.
  2. Enter the registration on GOV.UK. The DVSA vehicle recall checker shows recalls still open on that vehicle.
  3. Or check the flag here. Car recall check by registration: whether DVSA's MOT record for that registration flags an outstanding safety recall, and the likely campaign when one matches the model and build date.
  4. Ask a Mazda dealer. With the vehicle identification number (VIN) a dealer can see which recalls apply and whether the work is on record.

These pages cannot tell you whether one car is included: DVSA publishes models and build dates, not VINs.

Other recalls for these models

Buying Report £14.99 incl. VAT · one car · no subscription · Not a mechanical inspection.

Sources

  1. Driver and Vehicle Standards Agency, Vehicle recalls data (RecallsFile.csv). DVSA recall records, Open Government Licence v3.0. Accessed 22 Sep 2026.

Recall wording is DVSA's, as published. We list a recall under a model when DVSA's model name matches it exactly, or when an editor has checked the match. A recall lists models and build dates, not single vehicles. How we compare